Views: 0 Author: Site Editor Publish Time: 2026-11-09 Origin: Site
When hospital procurement officers and medical equipment distributors source furniture for obstetrics, gynecology, and maternal health clinics, two operational concerns dominate their decision-making: electrical safety around biological fluids and reliable positioning during power fluctuations. While multi-motor electric tables work well in urban surgical suites, public healthcare tenders across Latin America, Africa, Southeast Asia, and island nations frequently specify a heavy-duty hydraulic gynecological examination table.
By combining foot-pump hydraulic elevation with a telescopic leg platform, a single hydraulic unit serves as both an outpatient pelvic examination chair and a full-length obstetric delivery bed—without relying on wall power outlets or delicate electronic circuit boards.
Here are the critical engineering answers to the questions B2B importers and clinical directors ask most when evaluating hydraulic maternity platforms.
In active labor and gynecological procedures, amniotic fluid, blood, and saline irrigation solutions frequently splash onto the base of the examination table. Furthermore, regional clinics and district maternity hospitals often face unstable electrical grids where sudden voltage drops can freeze an electric bed mid-procedure.
Specifying a hydraulic obstetric delivery bed resolves both clinical risks while protecting hospital maintenance budgets:
100% Independence from Electrical Grids: Vertical height adjustment from 650 mm to 900 mm is powered entirely by a sealed, heavy-duty hydraulic foot pump. Obstetricians and midwives can raise or lower the patient smoothly during power blackouts without needing backup battery replacements.
Zero Electrical Short-Circuit Hazard: With no power cords trailing across wet delivery room floors and no electronic control boxes mounted under the pelvic deck, staff can wash and disinfect the chassis without risking electrical shorts.
Heavy-Duty 240 kg Safe Working Load: Supported by a reinforced powder-coated steel chassis weighing 68 kg net, the hydraulic column holds a certified 240 kg maximum load capacity without oil drift or frame wobble, accommodating pregnant mothers alongside clinical instruments.
Outpatient clinics and maternity wards often struggle with cramped room footprints. Purchasing separate examination chairs and recovery beds doubles equipment costs and crowds clinical floor space.
An integrated telescopic leg section allows caregivers to adapt the bed's overall length between 1655 mm and 2223 mm across a comfortable 950 mm width:
Retracted Lithotomy Mode (1655 mm Length): For pelvic examinations, colposcopy, or active delivery, the lower leg deck retracts smoothly, allowing the obstetrician to stand directly at the perineal edge. Dual lateral leg stirrups adjust easily to comfortable angles and detach completely when not needed.
Extended Full-Length Bed Mode (2223 mm Length): Before and after delivery, pulling out the telescopic leg section and adjusting the manual calf support creates a spacious 2223 mm × 950 mm flat recovery bed.
Stainless Steel Pull-Up Guardrails: Sturdy, rust-resistant stainless steel pull-up side rails lock along both flanks of the bed, giving laboring mothers a solid handhold during contractions and preventing accidental falls during postpartum recovery.
During prolonged labor or gynecological surgery, rapid posture changes and thorough post-procedure disinfection are non-negotiable clinical requirements:
Hand-Operated Trendelenburg Tilt (0° to 10°): If a patient experiences sudden hypotension or postpartum hemorrhage, caregivers can immediately tilt the bed between 0° and 10° Trendelenburg (front-to-back tilt) using a responsive hand-operated mechanism—requiring zero electrical power.
Wide Backrest Articulation (0° to 75° ± 5°): Smooth manual backrest adjustment up to 75 degrees allows mothers to transition effortlessly from a flat supine posture to an upright seated delivery position.
Removable Full-Body Synthetic Leather & Filth Basin: The entire chair body is wrapped in soft, fluid-proof synthetic leather that detaches quickly for deep cleaning and chemical disinfection. A retractable stainless steel filth basin positioned beneath the seat cutout captures amniotic fluid and irrigation runoff cleanly.
For medical distributors importing from China, shipping bulky assembled examination chairs can erode profit margins if packaging is poorly designed.
To simplify warehouse handling and international ocean freight, each hydraulic gynecological examination table is packed as one complete set per reinforced export carton:
Standardized Export Carton Dimensions: Measuring L1760 mm × W960 mm × H800 mm (approximately 1.35 CBM per unit) with a gross weight of 78 kg (68 kg net weight), each box can be moved easily by a standard warehouse pallet jack or two-person crew.
Container Loading & Mixed FCL Efficiency: A standalone 20'GP container loads roughly 18 to 20 cartons, while a 40'HQ container accommodates approximately 48 to 50 complete sets. Better yet, distributors ordering our manual or electric hospital beds can load 5 to 15 sets of these hydraulic gynecological tables in the same mixed container to fulfill turnkey clinic contracts in a single shipment.
Specification Item | Verified Factory Parameter |
Product Name | Hydraulic Gynecological Examination & Delivery Bed |
Overall Dimensions (L × W × H) | (1655 – 2223) mm × 950 mm × (650 – 900) mm |
Length Adjustment (Telescopic Leg Deck) | 1655 mm (Retracted) to 2223 mm (Fully Extended) |
Bed Platform Width | 950 mm |
Hydraulic Height Adjustment Range | 650 mm – 900 mm |
Backrest Elevation Angle | 0° – 75° (±5°), Manual adjustment |
Trendelenburg Tilt (Front-to-Back) | 0° – 10°, Hand-operated adjustment |
Calf & Leg Support | Manually adjustable calf support + Detachable bilateral leg stirrups |
Frame & Side Rail Construction | Powder-coated steel chassis + Stainless steel pull-up guardrails |
Upholstery Material | Full-body wrapped synthetic leather (Comfortable, removable for cleaning) |
Standard Clinical Accessory | Retractable stainless steel filth / fluid collection basin |
Maximum Safe Working Load (SWL) | 240 kg |
Net Weight / Gross Weight | 68 kg (Net) / 78 kg (Gross) |
Export Packaging Configuration | 1 Complete set per export carton (L1760 × W960 × H800 mm) |
Shanghai Quzhi Industrial is an ISO 13485 and CE (MDR Class I) certified manufacturer of hospital beds, hydraulic examination tables, and turnkey maternity ward furniture. We support medical distributors, private clinic chains, and government health tenders across Latin America, Southeast Asia, Africa, and island territories with flexible MOQs and mixed-container consolidation.
Every shipment is backed by our 2-year structural frame warranty and 1% free wearable spare parts policy on full container orders.
To download the official Technical Data Sheet (TDS), request sample pricing, or get a customized FOB/CIF container quote, contact our export engineering team:
WhatsApp: +86 15201775756
Official Website: www.quzhimeidical.com
